Tattletale User Manual page 27

Done:
Used to exit programming.
Edit:
Used to change an item that has been previously input into the system.
Entry Delay:
Indicates the amount of time user has to disarm system before an alarm occurs.
Exit Delay:
Indicates the amount of time user has to exit the area before alarm is set.
Features:
Used to manage Contacts, Custom Alerts, send a Test message, Screen Saver, Timers, Panic Keys, Tamper,
Review Log, or More Advanced Features.
Full Privileges:
User has access to disarm system, bypass sensors, configure system, and manage Hot Buttons.
Home Mode:
Used to arm system while at home. System arms instantly, all perimeter sensors become instant, and all
interior sensors are disabled.
Hot Button:
An auxiliary alarm that is operated independently of the main system. They are designed for assets you
would like to stay hot until you turn it off and so that no one else can undo your security.
Hot Button Status:
Indicates when Hot Button is ready to arm, open, or armed.
Initial Setup:
Steps user takes when powering up the system for the first time.
Instant Mode:
The base unit motion detector will trigger an instant alarm as soon as motion is detected.
Interior Sensors:
Sensors located inside the home, these sensors will not arm in Home Mode.
Interior Instant:
Interior sensors that do not have a delay time. When tripped an instant alarm will occur.
Interior Delay:
Interior sensors that will go into delay time when tripped.
27 | P a g e