The Ldws Does Not Operate When - Kia CEED Owner's Manual

Warning indicator
If the LDWS FAIL warning indicator
comes on (yellow indicator blinking), the
LDWS is not working properly. We rec-
ommend that the system be checked by
an authorised Kia dealer.
The LDWS does not operate
when:
• The driver turns on the turn signal to
change lane.
But, when the hazard warning flasher
is operating, the LDWS operates nor-
mally.
• Driving on the lane line.
✽ ✽ NOTICE
To change lane, operate the turn signal
switch, then change the lane.
OJD052056N
The LDWS may not warn you even
if the vehicle leaves the lane, or
may warn you even if the vehicle
does not leave the lane when:
• The lane is not visible due to snow, rain,
stain, a puddle or many other things.
• The brightness of the outside changes
suddenly.
• Not turning on the headlight even at
night or in the tunnel.
• Difficult to distinguish the colour of the
lane from the road.
• Driving on a steep grade or a curve.
Driving your vehicle
• Light reflects from the water on the
road.
• The lens or windscreen is stained with
foreign matter.
• The sensor can not detect the lane
because of fog, heavy rain or heavy
snow.
• The surrounding temperature of the
inside rear view mirror is high due to a
direct ray of light.
• The lane is very wide or narrow.
• The lane line is damaged or indistinct.
• The shadow is on the lane line by a
median strip.
• There is a mark similar to a lane line.
• There is a boundary structure.
• The distance from vehicle ahead is
very short or the vehicle ahead hides
the lane line.
• The vehicle shakes heavily.
• The lane number increases or decreas-
es or the lane lines are crossing com-
plicatedly.
• Putting something on the dashboard.
• Driving with the sun in front of you.
• Driving in areas under construction.
• The lane line is more than two in either
side (Left/Right).
5 61