Zte BLADE VEC PRO User Manual page 58

3. Touch the Wi-Fi network name and then touch Forget.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which support WPS.
You can use one of the following methods to connect your phone
to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Touch
2. Slide the Wi-Fi switch to the ON position.
3. Touch
4. Press the WPS button on the wireless router and the
access point will recognize your phone and add it to the
network.
Method two: PIN number
1. Touch
2. Slide the Wi-Fi switch to the ON position.
3. Touch
4. The WPS PIN number displays on the screen. Enter the
PIN number into the access point's setup page.
After entering the PIN number, your phone automatically finds
the access point and configures the connection.
NOTE:
For detailed information about the WPS feature of the access
point, please refer to its user documents.
> > Settings > Wi-Fi.
.
> > Settings > Wi-Fi.
> WPS Pin Entry.
58