Interval Timer - Nokia 2865 User Manual

9251716_2865_1_en_au_oth_v1.0.fm Page 71 Friday, September 1, 2006 10:18 PM
1. Select Menu > Organiser
Normal timer.
2. Enter the time (in hh:mm:ss
format), and select OK.
3. Enter a note for the timer, and
select Start.
and the timer (in hh:mm:ss
format) appear in standby mode when
the countdown timer is running.
When the time runs out, your phone
sounds an alarm, vibrates, and flashes
its lights. If you are in standby mode,
select Restart or Exit. If you are not in
standby mode, press any key during the
alarm to stop the timer.
After 60 seconds the timer alert
expires automatically. Select
press the end key to clear the timer
note.
To change the time:
1. Select Menu > Organiser
Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a
new note, and select Start.
To stop the timer before the alarm
sounds, select Menu > Organiser
Timer > Stop timer.

Interval timer

The interval timer in your device allows
you to store multiple interval timers.
You can define and store up to 10
> Timer > timing periods for each interval timer.
Once at least one interval timer is set
and stored, you can select the interval
timer and one of the stored intervals
for that timer. When the selected
interval expires, your phone sounds an
alarm, vibrates, and flashes its lights.
To set an interval timer:
1. Select Menu > Organiser
Interval timer.
2. Select Add new
only appears if you have already
created an interval timer.
3. Enter a name for the timer, and
select Save.
4. Enter a name for the first timer
Exit or period, and select Save.
5. Enter the desired time interval,
and select OK.
6. Select an existing stored period
> Timer > and Edit period,
period, or Start
To use an interval timer:
1. Select Menu > Organiser
Interval timer, and one of the set
interval timers.
the only choice if you have not yet
>
set any interval timers.
2. Select Start timer,
timer, Add new
timer. These options only appear if
you have already created an
interval timer.
O r g a n i s e r
> Timer >
timer. This option
Add period, Delete
timer.
> Timer >
Add new timer is
View timer, Edit
timer, or Delete
71