Honda Civic Sedan 1993 Owner's Manual page 151

Replacing Rear Bulbs (in
Trunk Lid)
1. Open the trunk.
2. Remove the electrical connector
from its hold-down dip by sliding
it sideways toward the center of
the car.
3. Use a Phillips-head screwdriver
to remove the two screws from
the bulb holder. Remove the
holder from the taillight assem-
bly.
4. Try the taillights and back-up
lights to verify which bulb needs
replacing. Remove that bulb
from the socket by pushing it in
slightly and turning it counter-
clockwise.
5. Install the new bulb in the socket.
Test it to make sure it works.
6. Reinstall the bulb holder assem-
bly. Install the two screws and
tighten them securely.
Lights
High-mount Brake Light
1. Open the trunk and remove the
socket from the light assembly
by turning it one-quarter turn
counterclockwise.
2. Remove the bulb by turning it
one-quarter turn counterclock-
wise.
3. Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Maintenance