Removing The Hard Disk From The Secondary Hdd Bay (Models D & E) - Jetbook 8724PX User Manual

Removing the Hard Disk from the Secondary HDD Bay (Models D & E)
Note that the secondary hard disk (Models D & E if installed) is located under the
optical device bay (CD/DVD).
1. Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2. Remove the optical device (see
on page 6 - 9)
3. When the optical device is removed the secondary HDD assembly will be visible.
4. Remove screws -
1
"Upgrading the Optical Device (Models D & E)"
from the secondary HDD assembly.
3
1
Upgrading The Computer
2
3
Upgrading the Hard Disk Drive(s) 6 - 21

RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 17
Secondary HDD
Assembly Screws
(Models D & E)
6