Upgrading the Optical Device (Models A/C)
1.
Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2.
Locate the hard disk bay cover and remove screws
3.
Lever up the HDD bay cover at point
4.
Remove the screw at point
optical device at point
5.
Reverse the process to install any new optical (CD/DVD) device.
1
3
, and then remove the cover
3
, and use a screwdriver to carefully push out the
4
.
5
2
4
Upgrading The Computer
.
&
1
2
.
4
3
5
Upgrading the Optical Device 6 - 7
Figure 6 - 3
Removing the
Optical (CD/DVD)
Device
Models A/C
6