Advertisement
If your bike came with a handlebar-mounted front reflector (white), remove the reflector mounting screw and gently
open the bracket enough to slide over the handlebar on the left side of the stem (7-C). Position the reflector
perpendicular to the ground and secure with the screw. Use care not to over-tighten as the bracket may crack.
If your bike came with a fork mounted reflector it will be mounted but may need to be adjusted to the proper position
(7-D). Rotate the reflector upright. Loosen the adjustment screw located below the reflector, set perpendicular to the
ground and tighten to secure.
Properly positioned
handlebar reflector
7-C
NOTE: For additional maintenance and safety tips, be sure to read your Owner's Manual thoroughly.
QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product
11/12/13
specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
Adjustment screw
Mounting screw
Properly positioned
fork reflector
7-D
pg. 8
Advertisement
