Rf Test Mode; Table 5-2. Test Frequencies - Motorola ASTRO XTL 5000 Basic Service Manual

Performance Checks: Test Mode
5. Pressing the Home button will cause the displays to stop. The RF test mode will be entered.
The display will show 1 CSQ , indicating test frequency 1, Carrier SQuelch mode.
6. Go to the RF Test Mode section.
5.3.2

RF Test Mode

A special routine, called RF TEST MODE or air test, has been incorporated in the radio.
1. Enter the RF test mode by pressing the Home button when the test mode menu RF
TEST is displayed. Use the Mode rocker to cause the radio to display the test mode
menu, RF TEST , if the display reads CH TEST.
2. Press the Home button to move the cursor back and forth between the frequency and
signaling type (See
flash to indicate which type is currently selected. Press the Mode button to scroll through the
available selections.
6881096C73-O
Table 5-2 on this page and

Table 5-2. Test Frequencies

Test Channel 700/800 MHz
TX #1 762.0125
RX #1 762.0625
TX #2 769.0125
RX #2 769.0625
TX #3 775.9875
RX #3 775.9375
TX #4 794.0125
RX #4 851.0625
TX #5 805.9875
RX #5 860.0625
TX #6 806.0125
RX #6 860.0625
TX #7 823.9875
RX #7 869.9375
TX #8 851.0125
RX #8 851.0625
TX #9 860.0125
RX #9 860.0625
TX #10 869.8875
RX #10 869.9375
Table 5-3 on page 5-4 ). The first digit will
5-3
June 11, 2003