Advertisement
OPERATING
Opening Wheelchair
Tilt the wheelchair toward you far enough to take the weight off the
opposite wheel. Push down on the seat rail (the one closer to you) until
the wheelchair is completely opened. Make sure seat rail tubes are
snapped into frame saddles.
Warning:
Do not place your fingers between the frame rail and seat sling
when opening or folding the wheelchair.
Folding Wheelchair
Before folding the wheelchair, flip up the foot plates to a vertical position.
Grasp the seat sling (in the center) and lift sharply until the wheelchair is
folded.
Warning:
Never lift the wheelchair by the swing-away footrests or elevating
leg rests or armrests. These parts are detachable. Lifting the
wheelchair by them may cause damage to the chair or injury to
the user.
Install/Remove Swing-away Footrests
Place swing-away pivot saddle into the receiver on front frame tube.
Rotate the footrest inward until it locks into place on locking bolt.
To remove footrest, push release latch outward the frame, rotate
footrest outward and lift.
Install/Remove Elevating Leg rests (Optional)
To Install or remove elevating leg rests see instruction for swing-away
footrest above.
Advertisement
