Changing the Group
U(Monitor)-Parameter group
B(Basic)-Parameter group
F(Frequency)-Parameter group
S(System)-Parameter group
C(Control)-Parameter group
H(I /O)-Parameter group
P(Protection)-Parameter group
Data Changing Mode
xxx.x
(Parameter-Setting value)
DATA
SET
*Change the number
using the up/down key
*Change the digit
using the shift key
Figure 5.1 Parameter setting method
5. Parameters
5-7
Changing the Subgroup
X 0-Subgroup
X 1-Subgroup
X n-Subgroup
X : U, B,, F, S, C, H, P
Changing the Parameter Number
XY-01 Parameter
XY-02 Parameter
XY-n Parameter
Y : 0, 1, 2 ~ Value
MOSCON-E7 User's Manual
5-8
5.1.2 Monitoring function setting
Letter or number in bold on display indicates that it is blinking. Only
the blinking letter or number can be changed. Next digit has to be
selected using the shift key (
) to move to another group and
subgroup.
Power ON
0.00 (U0.01)
U0.01
DATA
DATA
SET
SET
U0 .01
U0.01
Figure 5.2 Selecting monitoring group (U)
When
or
is pressed from group U, next or previous subgroup
is displayed.
Since U has a monitoring function and the setting can not be altered,
can not be functioned to change the constant as in other groups.
SET
DATA
DATA
SET
SET