Identification Data; Two-Wheel Tractor Identification; Engine Identification; Ec Marking - S.E.P. REV. 1000 (2+2) Use And Maintenance Manual

− in case of excessive vibrations (investigate cause
immediately).
• Stop the engine before adjusting attachments.
• Periodically check that all nuts and bolts are tight.
• Do not leave your two-wheel tractor in closed am-
bient with fuel in the tank. Fuel vapour is a potential
source of danger.
• Keep your two-wheel tractor clean. Do not let grass
and oil residues build up: these are a fire hazard.
• Fuel is highly flammable. Store fuel only in spe-
cifically designed containers. Refuel your two-
wheel tractor in the open. Do not smoke while re-
fuelling.
• Complete refuelling before starting the engine. Do
not remove the fuel cap or refuel when the engine
is running or hot. In case of fuel spillage, do not
start the engine. Push your two-wheel tractor some
distance away from where the spillage occurred
before starting it.
• Replace the exhaust pipe if it becomes worn or
damaged.

IDENTIFICATION DATA

TWO-WHEEL TRACTOR IDENTIFICATION

The serial number is stamped on the engine side of
the gear box of your two-wheel tractor (see fig. 1, item
1).

ENGINE IDENTIFICATION

Refer to the engine Operation and Maintenance Man-
ual.

EC MARKING

The two-wheel tractor is marked EC in compliance with
the Directive of the European Community Council
89/392/EEC and further amendments (see fig. 1, item 2).
The summary of the EC marking related to the 1000
and 1000 Special models are indicated below.
GB
5