IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK 1800 882 350 ROI...
Do not repair a damaged cable, replace it with a Maintenance and storage new one. Use only Flymo replacement cable. 1. Keep all nuts, bolts and screws tight to be sure the product 10.Always wind cable carefully, avoiding kinking.
Assembly 1. Attach the wheel and washer onto the axle (A1) ensuring the wheel is secured with the retaining pin (A2). Attach the hub cap, ensuring the clips and holes are aligned before securing into place. Repeat on the other side. 2.
Page 5
Feeding in Garden waste 1. Feed the material to be shredded into the Feed Inlet (G1). The material is pulled in by the cutting blade automatically. • Caution! Do not feed garden building waste such as, sawn timber, fencing and decking. •...
Collection Box • Important 2. Hold the handle on the Collection Box and pull out Switch off product before removing the Collection Box. from under the shredding unit (L). The Collection Box is a safety guard that prevents access 3. Empty the Collection Box.(M). to the cutting blades.
Caring for your Shredder Cleaning • USE GLOVES • IMPORTANT It is very important that you keep your product clean. Debris left in any of the air intakes or under the product could become a potential fire hazard. 1. With a brush, remove any debris from the Feed Inlet (Q) 2.
A network of specialist dealers can be found in your local Yel- 3. Prepacked spares are available from most Husqvarna low Pages. To obtain service on your Flymo product simply UK Ltd. stockists. telephone or visit your local Service Centre.
Need help?
Do you have a question about the Pac a Shredder and is the answer not in the manual?
Questions and answers