Table of Contents
Advertisement
Operating Your Camera
Exposure
Press the SET button while in AUTO mode to adjust the automatic
•
scene accumulation multiplier for low-illumination operation (x2 ~ x60).
The greater the video accumulation factor is, the brighter the screen is
•
but the after image of moving objects grows accordingly.
Noise, white spots, and interference may occur in high accumulation
•
factors, this is normal.
If the gain control (AGC) of EXPOSURE mode is set to OFF, SENS-
•
UP mode is
set to '- - -'
•
Because there can be a difference in the effectiveness of HSBLC -
•
according to the amount of light area in the screen - optimise the
installation angle for the best HSBLC performance.
When dark, the HSBLC is only activated when a bright light exceeds a
•
specific size (in NIGHT ONLY mode).
The HSBLC is not activated in day light or when bright light is not
•
present at night (in NIGHT ONLY mode).
18
Advertisement
Table of Contents
