Specifications - Sanyo VCC-WD8870P Service Manual

1. SPECIFICATIONS

Scanning system : PAL standard 625 lines, 50 fields/sec.
Image sensor : 1/3" progressive CMOS
Number of effective pixels : 800 (H) x 600 (V)
Horizontal resolution : 550 TV lines, typical
Minimum illumination (approx.) : 0.8 lx (F1.2 color mode), 0.08 lx (F1.2 B/W mode)
Video output : 1.0 V (p-p)/75 ohms, composite, BNC
Video S/N ratio : More than 48 dB (AGC OFF:More than 50 dB)
Light control : Optical auto iris lens/Electronic iris (indoor use)
Auto iris lens drive : DC
Lens mount : CS mount
Flange back : 12.5 mm ± 0.5 mm/ 0.5 in. ± 0.02 in. adjustment
Menu : On screen display
Wide dynamic range : ON (65 dB typical)/OFF
Backlight compensation : OFF/ON (Center zone metering)
White balance : ATW/ Manual
Gain control : Normal/High/OFF
Electronic shutter : 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.
Aperture compensation : Normal/High/Low/OFF
Day/Night : AUTO/ COLOR/ B/W
Camera title : OFF/ON, Up to 16 characters, adjustable title position
Digital noise reduction : ON (1, 2)/OFF
Operating environment : Temperature -10°C - +50°C (14°F - 122°F)
Operating Environment : Humidity less than 90% RH max. (no condensation)
Power supply : 220 - 230 V AC 50 Hz
Power consumption (approx.) : 6.5 W (with auto-iris lens)
Weight (approx.) : 550 g/ 19.4 oz. (without lens)
Weight (approx.) : 580 g/ 20.5 oz. (without lens)(U.K.)
Dimensions
149 (5.9)
1
(0.04)
71 (2.8)
139.5 (5.5)
Unit: mm (inch)
1/4" -20UNC
- -
3