Electrolux EWG 12440 W User Manual page 16

Hide thumbs Also See for EWG 12440 W:
Table of Contents

Advertisement

16 electrolux use
Cancelling a programme
Turn the selector dial to «O» to cancel
a programme which is running. Now
you can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the «Start/Pause» button.
If the «Door locked»
the door can be opened.
If the «Door locked»
goes off, this means that the machine
is already heating, that the water level
is above the bottom edge of the door
or that the drum is turning. In this case
the door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to «O».
After few minutes the door can be
opened (pay attention to the water
level and temperature!).
At the end of the programme
The machine stops automatically.
Three flashing "
display, the buzzer sounds for few
minutes, the Start/Pause light and the
«Door locked»
door can be opened.
If the Rinse Hold
been selected, the Start/Pause light
light goes off,
goes off, a flashing "
on the display, «Door locked»
light is still alight: the door remains
light does not
locked to indicate that the water must
be emptied out before opening the
door.
To empty out the water please read
the steps on the Rinse Hold option
paragraph.
At the end of the cycle, turn the
programme selector dial to «O» to
switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out
another wash, close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
0.00
" will appear on the
pilot light go off: the
option have
0.00
" will appear
pilot

Advertisement

Table of Contents
loading

Table of Contents