Dy Wire Dressing - Sony Trinitron KV-21FT250 Service Manual

2-9. DY WIRE DRESSING

1) Dress DY Conn along Conn Assy, 5P (200V) as shown.
2) Dress DY Conn and Conn Assy, 5P (200V) with Purse Lock Ø5.
Note : Kept DY Conn & Conn Assy, 5P away from FBT area by a distance of 10mm or more.
Conn Assy, 5P
DY
2
DY Conn goes above Conn Assy, 5P
CAUTION:
Do not overpull the wires during dressing --> avoid disconnection
of wire.
KV-21FT250
Earth Assy, Coating
1
DY Conn goes underneath of Earth
Assy, Coating and Conn Assy, 5P
Purse Lock Ø5
Dress DY Conn and Conn Assy, 5P
(200V) with Purse Lock Ø5.
3
Purse Lock Ø5
≥ 10mm
Use heat sink height to
estimate purse lock location
TVSR Requirement :
All wires must be kept away from
FBT area by a distance of 10mm or
more.
KV-21FT250
Make sure DY Conn is on the
right side of Earth Assy,
17