Magic Control Technology USB 2.0 VGA ADAPTER User Manual page 13

Step 6b.
I
NSTALLATION OF
a. Please select "No, I will restart my
computer later." And click "Finish" to
continue the next installation.
b. Connect another external display device to the VGA (DB15) connector of next
USB 2.0 VGA Adapter and switch it on. Then, plug the USB 2.0 VGA adapter
into an available USB 2.0 port of your PC.
c. Driver installation proceeding ...
*You may notice the screen flashes during
hardware installation. It is part of the
normal process.
d. If you wish to install additional USB 2.0 VGA Adapter, please follow the
procedure a~ c again.
e. Otherwise, please select "Yes, I
want to restart my computer now."
and click "Finish" to complete the
driver installation.
After reboot the computer, the extended
display will be shown on the display
devices.
USB 2.0 VGA A
M USB 2.0 VGA A
ULTIPLE
User Manual
DAPTER
DAPTERS
13