Lenovo ThinkPad T61 Service Manual page 98

Removing and replacing a FRU
For discrete graphics models: When you are servicing, make sure that the thermal
(continued)
92
MT 6463, 6464, 6465, 6466, 6467, 6478, 6471, 6457, 6458, 6459, 6460, 6461, 6462, and 6470
Step Screw (quantity)
5
M2 × 3 mm, small-head, nylon-coated (1)
a
5
rubber for FET is firmly attached on the system
board as shown in a . When replacing the rubber,
you need to peel the thin film off from the bottom,
and attach it to the system board.
6
Color Torque
Silver 0.167 Nm
(1.7 kgfcm)