Appendix A: Indicator Lights Extender; Appendix B: Dip Switches Extender - Egardia Extender Installation Manual

APPENDICES
A – Indicator lights extender
B – DIP switches extender

APPENDIX A: INDICATOR LIGHTS EXTENDER

The extender features 3 indicator lights. Here below you will find an overview of the operation of the
various indicator lights.
Indicator light Activity
(green)
Indicator light Status
(red)
Indicator light Fault
(yellow)

APPENDIX B: DIP SWITCHES EXTENDER

The extender features 6 DIP switches that allow you to adjust the operation of the extender. Here
below you will find an overview of the operation of the various DIP switches.
DIP switch 1
OFF
ON
DIP switch 2
OFF
ON
DIP switch 3
OFF
ON
DIP switch 4
DIP switch 5
DIP switch 6
4
Off Extender is not connected to a power
supply
On Extender is connected to a power
supply
Flashes once Extender receives a signal from a
accessory or from the gateway
Off Extender is in standby mode
On Extender is ready for installation
Flashing Extender is ready for testing
Off Normal operation
On Internal battery is low
Flashes once Accessory is successfully registered
with the extender
Installation
Default
Installation mode
Test
Default
Testing mode
Erase memory
Default
Erase memory
Reserved
Reserved
Reserved