Table of Contents
Advertisement
around at the ends.
PATTERN TYPE Control
The PATTERN TYPE control selects from one of 32 internal patterns which display on the background
of the LED matrix and determine which of the underlying scale notes will play when the playback ball
lands on them. There is a range of geometric and other special patterns to choose from, all of which
provide different kinds of notes and rhythms depending on the motion type used. There is also a
pattern with every note enabled which may be useful for testing and hearing different motion patterns
and scales in their entirety.
MOTION TYPE Control
The MOTION TYPE control affects how the playback ball moves around on the display. Each motion
type can have up to 64 steps. Each of these steps can land on any position on the grid, and positions
can be visited twice, so quite complex motions are possible, not just sequential patterns. There are 64
motion types which are selected by using the MOTION TYPE control. Pressing on the control resets
the motion playback position to the first step.
When you change motion types, the selected motion is shown on the display briefly in the form of two
intersecting lines. The horizontal line represents the row, and the vertical line represents the motion
number from 1-8 along that row. This allows all 64 motions to be shown by the intersection of two
User Manual
// K4815 // Pattern Generator
10p
Hardware Version D/E
Firmware Version 1.1x
February 16, 2011
© 2010 Kilpatrick Audio
Advertisement
Table of Contents
