Changes From 12 Step V1.0 - Keith McMillen Instruments 12 Step Reference Manual

4.7 Changes From 12 Step V1.0

New tabbed interface
All new makeover for the 12 Step editor! Related parameters have now been grouped together
and moved to different tabs. Less information overload!
Presets are now numbered from 1-128
Previously the 12 Step's presets were numbered from 0 to 127. They are now numbered from 1 to
128 to make things easier on mere humans.
Automatic CC 7 message on preset change can be disabled
Traditionally the 12 Step would output a CC 7 127 message on every preset change. This could
cause problems with software/hardware that automatically respond to this message. There is now
an option in the Settings tab to enable or disable this feature, called Send Full Volume On Preset
Change.
Input to MIDI Expander has been fixed
In the previous version, changing presets on the 12 Step using program changes sent into the
Expander's MIDI Input would completely freeze the 12 Step if the preset was set to Legato or Hold
mode. This would only happen when using the 12 Step without a computer — if connected to a
computer, the 12 Step would operate correctly. This has now been fixed and should be working
properly.
In addition, control of the LEDs and display on the 12 Step is now possible via input to the MIDI
Expander. Previously this was limited solely to program changes.
Some minor preset changes/fixes
• Blues Lead has been transposed down from E to C to match the Blues Bass preset.
• The major third interval was removed from the scales on both the Blues Lead and Blues Bass
presets.
• The "Minor b7 Chords" preset was renamed to "Minor 7 Chords"
• The "Major b7 Chords" preset was renamed to "Dominant 7 Chords"
• The 1-4-5-7 presets had some incorrect notes corrected.
Appendix 56