De Havilland Watch Instruction Manual page 10

13. Set-up (basic setting of the watch)
4 sec.
To access the watch basic settings (SET-UP), press for 4 seconds
To move from one setting to the next press
press . To exit from set-up mode press for 2 seconds
A. (set-up) Priority mode set-up
«Priority» mode permits activation or deactivation of each watch
mode, so that you can completely personalize your watch by choosing
the functions you wish to display.
1) Local time / date
5) Fly chrono
4) Chrono
6
.
and to return to set-up
.
2) Alarm 3) UTC time
6) Block chrono 7) Altitude
8) QNH 9) Flight level
12) Barometer
Press in priority mode set-up (Prior SEL)> The 12 watch mo-
des display sequentially activate / deactivate (on/ off) with the
bezel move to the next mode (12modes)
can always quit the current adjustment by
mode, refer to special functions
«activation /deactivation of priority mode» p. 20
B. (set-up) Analogue time set-up
Press in analogue time mode (ANALOG watch) adjust using the
bezel, hours
ment is unidirectional.
17
10) QFE height 11) QFE pressure
exit.
) . To activate or deactivate priority
The digital time serves as a reference, turning
the bezel advances or retreats the hands
minutes return.N.B.: Time adjust-
(You can always quit the current adjustment by
(You
) .