Contents Description of the watch 13.Set-up (basic setting of the watch) A. Priority mode set-up General principle of manipulation B. Analogue time set-up Module organisation C. 12 / 24h selection D. UTC/local time selection E. Beep sound 1. Setting the digital time and date F.
Description of the watch Deployment clasp (ideal adjustment) Adjustment/setting bezel Light Mode, exit, (priority mode 2 s, set-up mode 4 s) Reset, lap time Enter 2–3 mm Start, stop 4. If you have correctly measured your wrist, there must be 2 –...
General principle of manipulation 1. Press button to switch to select a mode to confirm and exit to return immediately to from one mode to the next the base display to invert the sense of rea- 3. The flashing options are 8.
Module organisation Standard functions SET-UP Special functions basic setting of the watch time & date 4 sec. access set-up mode 2 sec. activate/deactivate priority mode alarm priority mode start chrono UTC time analogue time standby chrono 12 / 24h selection...
1. Setting the digital time and date 3. Setting UTC time Press 2x in UTC time mode, adjust the flashing time (H SET) Press 2x in time mode, adjust the flashing numbers using the using the bezel return. (You can always quit the current adjust- bezel, hours , minutes , seconds...
5. Flight chrono A. (Flight chrono) Registering of flights and landings Flight numbering displays for 4 s. displays for 2 s. displays for 4 s. Press 2x in mode fly chrono (FLYChr) to consult the flight logbook, choose the flight to consult using the bezel (up to 99 flights), flight date and time display, take-off time displays (TKOF), Press...
6. Blk chrono A. (blk chrono) Registering of flights and landings B. (blk chrono) Flight logbook consultation Flight numbering displays for 4 s. displays for 4 s. Flight numbering displays for 4 s. Press in mode blk chrono (bLKChr) to start the blk chrono, the block off time is displayed for 4 seconds.
8. DH-02: Flight numbering hP corresponds to hectopascals, «In» displays if inches have been chosen as the setting unit in the set-up menu Press in mode blk chrono (bLKChr) to empty the flight logbook, confirm by yes/no for the complete resetting to zero of the flight lo- gbook memory and return.
Page 9
10. DH-02: QFE height 12. DH-02: Barometer FT corresponds to feet, M displays if M corresponds to metres, FT displays metres has been chosen as the setting if feet has been chosen as the setting unit in the set-up menu unit in the set-up menu Press 2x in height mode (FT/M HGT), zero the QFE height (FT/M...
Page 10
13. Set-up (basic setting of the watch) 12) Barometer 4 sec. To access the watch basic settings (SET-UP), press for 4 seconds Press in priority mode set-up (Prior SEL)> The 12 watch mo- To move from one setting to the next press...
Page 11
quit the current adjustment by F. DH-02: (set-up) Metres / feet selection C. (set-up) 12 / 24h selection Press in metres / feet selection mode (SEL M-FT), use the bezel Press in 12 / 24 h selection mode ((SEL 12-24h), use the bezel to to select the desired mode return.
14. Special functions A. (special function) Activation / deactivation of priority mode C. (special function) Flight logbook consultation while registering 2sec. displays for 2sec. Press for 2 seconds to activate / deactivate (Prior/Stds) the During registering of a flight (in flight chrono or blk chrono mode) priority mode.
15. Complementary information DH01 / DH02 1. Digital time, date 2. Alarm 3. UTC time 4. Chrono 5. Chrono FLT 6. Block Chrono 7. DH-02 Altitude8. DH-02 9. DH-02 Flight Level 10. DH-02 QFE height 11. DH-02 QFE Pressure 12. DH-02 Barometer 13.
Page 14
The alarm sounds for 24 seconds, it can be stopped by pressing Definition: Flight time between the instant when the blocks/chocks any button. If you leave the setting set to «ON», your watch alarm are withdrawn before departure and the moment where they are will go off every day at the time displayed.
The maximum measureable altitude is 15,767m. 9. Flight Level (see diagram p.29) The altimeter resolution is 10cm. The extreme sensitivity of the The flight level is used to guarantee the spacing of aircraft in the sensor detects tiny pressure variations in real-time (the opening or sky.
To calibrate your barometer, you must enter the altitude at your 16. Diagram current location (see «baro» in the instructions for use). 13. Set-up Program section in which the watch basic settings are adjusted (see hauteur “Set-up” in the instructions for use). Flight Level 14.
As with all valuable objects, De Havilland watches are worthy of special care. Your De Havilland watch is pressure tight up to an excess pressure of 5 bars, corresponding to a depth of 50 metres. Each time the watch is immersed in the sea (salt) or a swimming pool (chlorine), the watch and metal strap must be rinsed in fresh water.
Page 18
- they double power consumption. magnetic fields originating from domestic and office appliances - Your watch is water-tight to 50 metres, but to guarantee the correct have no effect. functioning of your pressure sensor, it is advised to avoid its use at - Extreme temperatures: avoid prolonged direct exposure to significant depths.
Where faults are covered by the guarantee, your De Havilland the beneficiary of the legal guarantee for any faults or hidden watch, will be repaired free of charge at the discretion of De defects. Havilland Watches SA. The guarantee of the replacement watch expires twenty-four (24) months after the date of purchase of the watch replaced.