ATI Technologies Radeon Getting Started page 4

4
Grasp the
RADEON™/
RADEON™
VE by the top
edge and
carefully seat it
into the
AGP/PCI slot.
Ensure that
the metal
contacts are
completely
pushed into
the slot.
5
6
Make sure all
cables are
securely
connected.
You are now ready to proceed with the installation of the ATI driver. For detailed
instructions, select your operating system from the list below:
• Windows
on pag
• Windows
RADEON™/RADEON™ VE Getting Started...
Locate the AGP/PCI slot. If necessary, remove the metal cover from this
slot; then align your RADEON™/RADEON™ VE with the
AGP/PCI slot, and press it in firmly until the card is fully seated.
ATI RADEON™/
RADEON™ VE CARD
Replace the screw to fasten the card in place, and replace the
computer cover.
SCREW
ATI RADEON™/
RADEON™ VE CARD
Plug the display cable into your card; then turn on the computer and
monitor. If your RADEON™/RADEON™ VE came with a DVI
connector, you can connect a flat panel display to the appropriate
connector, as shown below...
® ®
98 / Windows
e5.
®
2000, see page
AGP/PCI SLOT
DISPLAY CABLE
Me, see Windows® "New Hardware Found"
6.
TO VGA MONITOR
(ALL GRAPHICS CARDS)
TO FLAT PANEL DISPLAY
(DVI-READY CARDS ONLY)
4