Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for HME ServerCall
- Page 1 ServerCall Paging System Server Paging System – with CrystalCall Pagers v909 HME Wireless, Inc Customer Service 800.919.9903 1400 Northbrook Parkway Suite #320 • Suwanee, GA 30024 HME 800.919.9903 ServerCall ® Paging System Page 1 ©HME WIRELESS, INC. 2012...
- Page 2 PAGING SYSTEM SETUP Thank you for purchasing HME’s “ServerCall” Server Paging System. Your system has been pre-programmed at the factory and will function once mounted and plugged in. Transmitter Set Up & Mounting Instructions: 1) Mount the transmitter unit onto the cook line using the included brackets, or remove the rear brackets and mount it directly to the wall if desired.
- Page 3 2. Install big bracket using the screws 3. Install small bracket using the rest of provided. See picture above for proper the screws. mounting. 4. Install the 2 knobs. HME 800.919.9903 ServerCall ® Paging System Page 3 ©HME WIRELESS, INC. 2012...
- Page 4 To page All Manager Pagers, press and hold the MGR All button until it stops beeping and flashing (5 seconds) and you hear a single short tone. This button only works if you have purchased the optional manager display pager. HME 800.919.9903 ServerCall ® Paging System Page 4 ©HME WIRELESS, INC. 2012...
- Page 5 Additional and / or Cancel Panel: The ServerCall has the option of an additional / cancel panel. The second panel is plugged into the first and placed in another location. This second panel allows you to send a page or cancel a page from either unit.
- Page 6 Remove all the pagers from the charging unit or simply unplug the power supply that is connected to the charging bases (pagers will go through their demo page). HME 800.919.9903 ServerCall ® Paging System Page 6 ©HME WIRELESS, INC. 2012...
- Page 7 2. Page three times and then reset 3. Page three times and page the manager with the server number (this option requires someone to clear the page by pressing the button again). HME 800.919.9903 ServerCall ® Paging System Page 7 ©HME WIRELESS, INC. 2012...
- Page 8 Press “CANCEL” key to exit the system-programming menu. 9. Setting Default Message - (Factory Default: ON) Message: 11 - This setup is fixed and should not be changed. HME 800.919.9903 ServerCall ® Paging System Page 8 ©HME WIRELESS, INC. 2012...
- Page 9 Press the “A” button to scroll through different messages. Turn Pagers Off: Press the “B” button until “Pager OFF” appears in the LCD window. Press the “C” button to turn the pager OFF. HME 800.919.9903 ServerCall ® Paging System Page 9 ©HME WIRELESS, INC. 2012...
- Page 10 2. Unplug the Transmitter & plug it back in. (Reboot) 3. Call HME Wireless - Customer Service at (800) 919-9903. We are available: Mon - Fri 9 am to 10:30 pm EST / Sat & Sun 11:30 am to 8:30 pm EST 365 days a year.
- Page 11 Control point: 1400 Northbrook Parkway, Suite 320, Suwanee, GA 30024 If you require a copy of the license, you can contact HME Wireless or obtain one from the FCC web site (www.fcc.gov). You may, however, want to apply for your own FCC license. Whether you use HME Wireless’...
- Page 12 Use ONLY authorized accessories with the equipment. Use of unauthorized accessories can cause the FCC Radio Frequency Exposure compliance requirements to be exceeded. HME 800.919.9903 ServerCall ® Paging System Page 12 ©HME WIRELESS, INC. 2012...
- Page 13 WALL MOUNT INSTALLATION 9 7/8 inches ServerCall Wall Mount Procedure 1) Remove the 4 rubber feet on the back panel to mount the ServerCall transmitter directly to the wall. The unit will mount using the 4 keyhole cutouts in the back panel.
Need help?
Do you have a question about the ServerCall and is the answer not in the manual?
Questions and answers