Installing Usb Dock - OCO USB DOCK - Einstein User Manual

Omnidirectional Control Technology
I n s t a l l i n g U S B D O C K
1. This installation guide is written in accordance with Windows 98/98SE. For
Windows 2000/XP, the step A, B, and C of the "Driver Installation" section will
be skipped.
2. Power on your computer and make sure that the USB port is enabled and working
properly. Please refer to the "application note 1" if you have any trouble.
3. Connect the power adapter into USB DOCK.
4. Connect the USB cable into USB DOCK and the USB port of your PC.
5. Windows will first detect the HUB device. Install HUB using operating system
software. Please refer to step A of "Driver Installation" section. (This section for
Windows 98 only)
6. Windows will detect the IEEE-1284 device. Please refer to step B of "Driver
Installation" section. (This section for Windows98/98SE/Me only)
7. Windows will detect the PS/2 keyboard & mouse device. Please refer to step C,
the "Driver Installation" section.
8. And Windows will detect the RS232 device. Please refer to step D of "Driver
Installation" section.
USB-DOCK User's Manual
- 6 -