HOW TO USE THE SA RESET FUNCTION
1. PURPOSE
In order to insert the new SA adjustment values, it need clearing SA initial values of the flash memory.
2. REQUIRED SA RESET
- After changing Traverse.
- After changing Main Board Assembly.
- After changing Main Board Flash IC.
3. SA RESET PROCEDURE
1) After the set turn on.(then, mode is the home menu)
2) Press HOME key to escape from home menu.
3) Press the 4 −> 5 −> 6 −> 2 −> 5 −> 8 −> 0(numerical button) on the remote controller
to display debug window.
2010
4-7