Introduction; Unpacking; Placement - Krell Industries Preamplifier KAV-250p Owner's Reference Manual

CE Marking
This product complies with the EMC direc-
tive (89/336/EEC) and the low-voltage
directive (73/23/EEC).
Introduction
Thank you for your purchase of the Krell
KAV-250p. To obtain the best performance
from your KAV-250p preamplifier, pay care-
ful attention to its placement, installation,
and operation. A thorough understanding of
these details will help insure satisfactory
operation and long life for the KAV-250p
and related system components.
THERE ARE NO USER-SERVICEABLE
PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized dealer,
distributor, or KrelP, if you have any
questions not addressed in this refer-
ence manual.
Unpacking
1. Open the box and remove the top layer of
foam. You will see these items:
1 KAV-250p
1 KAV-250p remote control
1 T-10 Torx wrench
1 AC power cord
1 packet containing the Owner's
Reference and the Warranty
Registration Card
NOTE: ff any of these items are not includ-
ed, please contact your authorized Krell
dealer or distributor immediately for assis-
tance.
2. Carefully remove the unit and acces-
sories from the box. Remove the protec-
tive plastic wrap from the unit.
NOTE: Save all packing materials. If you
must ship your KAV-250p in the future,
repack the un# in its original packaging to
prevent transit damage.
Placement
WARNINGS
The preamplifier must not be located where
it could be exposed to dripping or splashing
fluids.
Before you install the KAV-250p into your
system, review the following guidelines to
choose the location for the KAV-250p. This
will facilitate a clean, trouble-free installation.
The KAV-250p does not require any type of
special rack or cabinet for installation. For the
dimensions of the KAV-250p, see Specifi-
cations, on page 12.
KRELL
®
KAV-250p English Page 3 of 12