IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. The Loose Parts Pack is packaged underneath the deck of the product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct...
Page 3
Do not repair a damaged before clearing a blockage; cable, replace it with a new one. Use only Flymo before checking, cleaning or working on the appliance; replacement cable.
Assembly Instructions • The Loose Parts Pack is packaged underneath the deck. Assembly of Lower Handles to Deck 1. Place the bolt (A2) through the hole in the lower handle (A1) until the lower handle fits into the recess (A3) 2.
Grassbox Fitting Fully Assembled Grassbox to Lawnmower. Lift safety flap (G1) Make sure the discharge chute is clean and free from debris (G2) Locate fully assembled grassbox onto 2 location points (G3) at the rear of the deck as illustrated in pic.
Starting and Stopping To Start your Lawnmower 1. Connect plug to mains and switch on. The switchbox is provided with a lock-off button (L1) to prevent accidental starting. 1. Press and hold the lock-off button (L) on the switchbox, then squeeze one of the Start/Stop levers towards the upper handle (M).
Caring for your Lawnmower Cleaning • USE GLOVES • IMPORTANT:- It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard. 1. Remove grass from under the deck with brush. (R1) 2.
Service Recommendations 1. We strongly recommend that your product is serviced at 6. Should it be necessary for work to be carried out by your least every twelve months, more often in a professional ap- Service Centre, it is important to take your complete ma- plication.
Need help?
Do you have a question about the Chevron 32VC and is the answer not in the manual?
Questions and answers