Specifications - Yaesu FT-270R Technical Supplement

Specifications

General
Frequency Ranges:
Channel Steps:
Frequency Stability:
Repeater Shift:
Emission Type:
Antenna Impedance:
Rating:
Supply Voltage:
Current Consumption:
(Approx. @7.2 V)
Operating Temperature:
Case Size:
Weight:
Transmitter
RF Power Output:
Modulation Type:
Maximum Deviation:
Spurious Emission:
Microphone Impedance:
Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity:
Selectivity:
AF Output:
(@ 7.2 V)
Specifications are subject to change without notice, and are guaranteed within the 144 MHz amateur band only.
Frequency ranges and fanctions will vary according to transceiver version; check with your dealer.
2
RX 137 (136) - 174 MHz
TX 144 - 146 (148) MHz
5/10/12.5/15/20/25/50/100 kHz
±5 ppm @ –14° to +140° F (–10° to +60° C)
±600 kHz
F2D , F3E
50-ohm
Battery Operation: 7.2 V DC 1.5 A
Battery Charging: 12 V DC 1.5 A (EXT DC jack: PA-44C/U)
Battery Operation: 7.2 V DC (FNB-83)
Battery Charging: 12 V DC (EXT DC jack: PA-44C/U)
165 mA (Receive, 200 mW output)
45 mA (Standby, Saver Off)
20.5 mA (Standby, Saver On)
8 mA (Auto Power Off)
1.5 A (5 W TX 7.2 V DC)
–4 °F to +140 °F (–20 °C to +60 °C)
2.36" (W) x 4.72" (H) x 1.26" (D) mm (60 x 120 x 32 mm)
(W/O knob, antenna, & belt clip)
13.8 Oz (390 g) with FNB-83, antenna, and belt clip
5.0 W (High) / 2.0 W (Middle) / 0.5 W (Low) (@7.2 V)
Variable Reactance F2D, F3E
±5.0 kHz (F2D, F3E)
At least 60 dB below
2 k-ohm
Double-Conversion Superheterodyne
1st: 21.7 MHz
2nd: 450 kHz
0.2 μV for 12 dB SINAD (137-140 MHz)
0.16 μV for 12 dB SINAD (140-150 MHz)
0.2 μV TYP for 12 dB SINAD (150-174 MHz)
12 kHz/35 kHz (–6 dB /–60 dB)
800 mW @ 16-ohm for 10 % THD (Internal Speaker)
450 mW @ 8-ohm for 10 % THD (EXT SP Jack)
FT-270R/E Technical Supplement