Ricoh Remote Communication Gate Operator's Manual page 5

R CAUTION:
• Protect the equipment from dampness or wet weather, such as rain and
snow.
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.
• Keep the equipment away from humidity and dust. Otherwise a fire or an
electric shock might occur.
• Do not place the equipment on an unstable or tilted surface. If it topples
over, an injury might occur.
• Clean the plug end of the power cable at least once a year so as to avoid a
possible fire.
• To reduce the risk of fire, use only No. 26 AWG or larger tele-communication
line cord.
• Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de
télécommunications 26 AWG ou de section supérieure.
iii