Krell Industries DVD Player User Manual page 23

Showcase DVD Connections to Your System,
Note
Note
Krell Showcase DVD
continued
4. Connect the balanced (27) or single-ended (28) analog audio
outputs to your loudspeakers.
5. Connect the optics digital audio (33) or coaxial audio (34) digital
output to your loudspeakers.
DTS audio playback is available only from the digital outputs.
6. Plug the AC power cord into the IEC connector (39) on the back
panel, then plug the AC power cord into the wall socket. The red
stand-by LED (3) on the front panel illuminates.
When powering up any system, always turn amplifiers on last. When
powering down, always turn amplifiers off first.
19