Canon PowerShot A 640 User Manual page 105

DISP.
• The camera will switch to color
input mode and the display will
alternate between the original
image and the color swap image
(using the previously set color).
Still image
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the • button.
• Only one color can be specified.
• You can use the ... or .. button to specify the range of
colors that are swapped.
-5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the .. button.
• Only one color can be specified.
Press
0
to complete the setting, then
shoot.
DISP.
green into white.
• You may not obtain the expected results if you use the
flash .
• The colors specified in the color swap mode are
retained even if the camera's power is turned off.
II
en
::::r
o
o
....
:;'
(Q
67