Table of Contents
Advertisement
TS-‐NX
9.5.6 TSTT parameter
TSTT parameter is used to define reference point for sending test message. If this
parameter is set than after restart of the TS NX first test SMS will be send out at
time defined with TSTT parameter.
Parameter value is defined in hours.
Example:
To receive first test SMS at 20.00h TSTT value must be set to 20
NOTE
By setting TSTT=0 this function is disabled
9.5.7 MNF parameter
When it is necessary to fix the GSM network to one provider the user can use the
MNF parameter. The MNF parameter switches automatic network searching to
manual.
Example:
MCC/MNC code for Simobil is 29340, Mobitel is 29341, TIM is 22201, and
Vodafone
Italy is 22210.
More information about national MCC/MNC codes can be acquired at:
http://www.activexperts.com/activsms/networkcodes/
9.5.8 MIC parameter
MIC parameter enables you to change the sound level on microphone
9.5.9 SPK parameter
SPK parameter enables you to change the speaker sound level.
Page
2 7
INSTALLATION
M
ANUAL
Advertisement
Table of Contents
