Ford 2007 Five Hundred Owner's Manual page 23

Speed sensitive volume: Radio volume automatically changes slightly
with vehicle speed to compensate for road and wind noise.
Use / / SEEK
turns the feature off and level 7 is the maximum setting.
Setting the clock: Press MENU until SELECT HOUR or SELECT MINS
is displayed. Press
Press MENU again to disengage clock mode.
If your vehicle is equipped with an in-dash clock, refer to "Setting the
clock" in the Driver Controls chapter.
Track/Folder Mode: Available only on MP3 discs in CD mode. In Track
Mode, pressing SEEK
In Folder mode, pressing
within the selected folder.
Compression: Available only in CD mode, brings soft and loud CD
passages together for a more consistent listening level.
Repeat: Available only in CD mode. Press to repeat the current CD
track.
RDS (Available on Audiophile radios only): Allows you to search
RDS-equipped stations for a certain category of music format: Classic,
Country, Info, Jazz/RB, Religious, Rock, Soft, Top 40. RDS (only available
in FM mode) must be activated to access Find and Show functions.
To activate, press and hold MENU until RDS (ON/OFF) appears in the
display. Press MENU repeatedly to scroll through Find, Show and RDS.
Use / / SEEK
will not be able to access Find and Show functions.
Find: Allows you to search RDS-equipped stations for the desired music
category. Use /
SEEK or SCAN to begin the search.
Show: Allows you to display the name of the radio station or program
type. Use / /
4. Aux: Press to toggle between
FES/DVD and AUX modes. If no
auxiliary sources are available, NO
AUX AUDIO will be displayed. To return to radio mode, press AM/FM.
If equipped with Satellite Radio, press AUX to cycle through SAT1, SAT2
2007 Five Hundred (500)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
to adjust. Recommended level is 1–3. Level 0
/ / SEEK to adjust the hours/minutes.
will scroll through all tracks on the disc.
SEEK will scroll only through tracks
to toggle RDS ON/OFF. When RDS is Off, you
to find the desired program type, then use
SEEK to show type, name or none.
23