Page 4.1 Common Problems 1. Specifications....................2 Most issues with the HD-One DX/DX500 Series can be resolved by checking the Category cable terminations and ensuring that they are pinned to the T568B wiring Introduction ........…............3 specification. However, other problems may arise. Below are solutions to the most 2.1 Overview................…....3...
1.Specifications 3.2.2 C HD-One DX/DX500 ONNECTIONS ON THE Figure 3-1 shows the HD-One DX/DX500 transmitter connections, and Figure 3-2 shows the HD-One DX/DX500 receiver connections. CAT5e, CAT6, CAT6a, CAT6e, CAT7 UTP / STP or FTP Cable Required: (CAT6 or better is recommended)
• HDMI cables • HDMI to DVI adapter cables All HD-One DX/DX500 units should be cabled and powered on prior to turning on the video source device and display. It is recommended to cable and power on the • Category 5e/6/6a/6e/7 UTP / STP or FTP cable HD-One DX/DX500 units, then the display, and lastly the video source.