Advertisement
11.Redial:
In on-hook status, press REDIAL/PAUSE to review the last 16 dialed
numbers.
Pick up the handset or press
to dial the reviewed number.
12.Auto Redial:
In on-hook status, press AUTO RD/
continuously until the phone is answered.
13. 10 Sets of One-Touch Speed Dial Memories:
a.STORE:In on-hook status, press STORE , then input the phone number
you wish to store as one of the speed dial memories (M1~M10), and press
the specific one-touch speed dial memory key which you would like to
save the phone number with to finish the setting.
b.DIAL:Pick up the handset or press
the stored phone number automatically.
CALLER ID
1. Caller ID Review:
In on-hook status, press CLID
or
and the time they called .
2. Delete Caller IDs:
a. When you check the incoming calls, press CLID or
wish to delete. Press DEL/SET once quickly to delete a single call.
b. When you check the incoming calls, press CLID or
data. Press and Hold DEL/SET for 3 seconds to delete all calls.
3. Call Back from the Caller IDs:
In on-hook status, press CLID or
the Caller ID list, press CALL BACK and the number will be dialed. If you
have set up LOCAL CODE and PREFIX ,press CALL BACK twice to add
international code and local code all together in front of telephone number
automatically .
4. Set VIP Number:
a. In on-hook status, press CLID
or
as a VIP number. Press VIP and the number will be set as a VIP number.
You can set 20 VIP numbers at most using the same method.
b. When you review the Caller ID numbers, press VIP again to remove the
VIP setting.
PHONE BOOK PART
1. Store Phone Book Memories:
In on-hook status, press
. LCD will display ADD
9
to auto redial the last dialed number
and press M1 (M2~M10) to dial
to review the caller's phone number
to find the call you
to go to any call
to select the call you wish to dial from
to select the number you wish to set
SEARCH
a. Press CLID
to enter edit status. Enter the name.
b. Press
to access the telephone number input page and enter the
telephone number.
c. Press
to save and enter another name and phone number. You can
store 80 names and phone numbers at most in the phone book. Once you
reach 80,the LCD will display MEMORY FULL.
2. Review Phone Book:
a. Press
to access the phone book page. Press CLID
display "PLS Input Name". Enter the name to review the telephone
number.
b. Press CLID or
to review the phone book.
c. Alphabetical searching is supported. If you enter a letter then you can
review the phone book by the first letter of the name.
3.Delete:
In phone-book-review status, press and hold DEL/SET for 3 seconds to
delete the name and number.
4.Dial from Phone Book
a. In on-hook status, when review the phone book and find the number you
wish to dial, press
or pick up the handset to dial the stored phone
number.
b. In off-hook status, when review the phone book and find the number you
wish to dial, press CALL BACK to dial the stored phone number.
TROUBLE SHOOTING GUIDE
SYMPTOM
Phone does not ring
Is the phone cord connected securely in
wall jack and in the base unit?
Ringer volume is too low
Is ringer volume set on low?
Phone receives but cannot
Is the dial mode in accord with the
make calls
local telecom?
10
and LCD will
CAUSE AND REMEDY
Hide quick links:
Advertisement
