Sony DVP-NS780V Operating Instructions Manual page 31

12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 25 to
27 ( through
B
B-2 C-2
• D-PCM (page 85)
D-2
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 85)
13
Press ENTER.
When "DIGITAL OUTPUT" is selected
in step 9
• Quick Setup is finished and
connections are complete.
• If your AV amplifier (receiver) has an
MPEG audio decoder, set "MPEG" to
"MPEG" (page 85).
When "DIGITAL & 5.1CH OUTPUT" is
selected in step 9
• The Setup Display for "SPEAKER
SETUP" appears.
14
Press X/x to select the size of the
centre speaker.
If no centre speaker is connected, select
"NONE" (page 85).
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
).
D
OFF
LARGE LARGE
LARGE SMALL
NONE
LARGE
YES
15
Press ENTER.
"REAR" is selected.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT) :
LEVEL(REAR) :
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
16
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
"NONE."
17
Press ENTER.
"SUBWOOFER" is selected.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To set, press
To quit press
DISPLAY DISPLAY SETUP
18
Press X/x to select whether or
not you have connected a
subwoofer.
19
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set "MPEG" to
"MPEG" (page 85).
OFF
LARGE
LARGE(REAR) LARGE
LARGE(SIDE)
LARGE(REAR)
YES
OFF
LARGE
LARGE
YES
LARGE(REAR)
NONE
YES
, then .
ENTER ENTER
,continued
31