Sony DVP-NS780V Operating Instructions Manual page 19

If you are connecting to a monitor, projector, or AV amplifier
A
(receiver) having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel to output progressive signals. For details, see "Using
the PROGRESSIVE button" (page 20).
If you are connecting to a video input jack
B
Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will
enjoy standard quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
White (L)
Red (R)
If you are connecting to an S VIDEO input jack
C
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 81.
To change the colour system
If the on-screen menu of the player does not appear on the connected TV, switch the player's
colour system to match the colour system of the TV (NTSC or PAL).
First turn off the player by pressing "/1, and then press "/1 again while holding down X on the
player. The player turns back on, and the name of the colour system scrolls across the front panel
display.
Green
Blue
Red
Yellow
/C , P /C )
B B R R
Green
Blue
Red
Yellow
White (L)
Red (R)
,continued
19