Ehrlund ACOUSTIC PICKUP + PREAMPLIFIER Manual page 15

Connect the pickup to a preamp with a high impedance input. The
EAP is designed to work optimally with the EHRLUND PREAMP.
• Placing a pickup on an instrument makes the entire system act as
a microphone. This means that the pickup may also capture other
vibrations, such as sound from other instruments and from loud-
speakers. The sensitivity to these sounds will be significantly lower,
however, than with a normal microphone. The sound from strikes and
impacts on your own instrument will also be captured by the EAP.
Handle your instrument carefully.
• If you connect the EAP to a preamp from another manufacturer,
you may get unexpected effects, because other pre-amplifiers often
contain fixed filters to improve the frequency response from a certain
pickup. The Ehrlund Preamp does not have any filters; it is a pure
low-noise amplifier.
• The preamp can also be used for electric guitars. In this case
connect it directly to the mixing board.
If you have any questions, tips or comments, please contact support@ehrlund.se
For warranty details see www.ehrlund.se
15