System Requirement; Hardware Requirements; Software Requirements; Supported Plattforms - NET iCube Series User's Operation Manual

iCube SERIES User Operation Manual
2.0 System Requirements

2.1 Hardware requirements

The iCube cameras need the following system requirements:
- USB 2.0 on board Interface
- Pentium IV processor with a clock frequency of at least 1.5 GHz or higher
Application Notes:
- we prefer PCs with USB 2.0 on board. PCI or PCMCIA USB 2.0 adapters may have a lower performance
- the iCube need a "full powered" USB 2.0 interface (with 500mA)
-
use only USB 2.0 cables for "high speed"

2.2 Software requirements

The following software is required to use NET GmbH Camera API;
iCube Camera Device Driver
Compiler : Microsoft Visual C ++ 6.0, C++ Builder 6.0
Microsoft DirectX 9.0b or higher
The following software are required to use Cognex VisionPro software
iCube Camera Device Driver
iCube Cognex AIK Setup

2.3 Supported Plattforms

N E T G m b H A l l R i g h t s R e s e r v e d
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegisg2@aegiselect.com * http://www.aegis-elec.com
8