Step 2 Connect The Antenna - Sony KV-HR32K90 Service Manual

Step 2
Connect the antenna
If you wish to connect a VCR, see the "Connect a VCR" diagram on page 8.
or
: Signal flow
For optimum Performance
To connect the TV to the antenna or the VCR, use an antenna cable
(not supplied).
Note that one end of the cable has a male plug fitted while the other
end is fitted with a female socket. Connect the male plug to the 8
(antenna) terminal of the TV.
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
Antenna cable
(not supplied)
Antenna cable
(not supplied)
Rear of TV
continued
Using Your New TV
7