Basic Operation - Creation CT630 User Manual

Cutting plotter PCUT CT operating instructions
16

6.2 Basic Operation

6.2.1 Turn on the machine
6.2.1.1
6.2.1.2
6.2.1.3
6.2.1.4 When the initializing is over, the machine is in online state and connectable
CAUTION
When switching on the power, make sure your hands and other
articles are out of reach of such running parts as
main shaft and slider to prevent injury。
Check whether the power is in OFF position.
Plug the cable into the receptacle of the host power source, press the power
on/off on the left。
LCD in the control panel is ON and displays the initializing process of the
host and shows following information：
with the computer to be operable。
ON
--*-PCUT-*--
* CT-630 *
Ver4.11a
00123456
On Line
PCUT SERIES USER ' S MANUAL