Honda 86-87 TA200 FATCAT Service Manual page 84

CYLINDER/PISTON
Measure the diameter of the piston 10 mm from the bottom
and 90 0 to the piston pin hole.
SERVICE LIMIT; 64 .90 mm (2.555 in)
Compare t his measurement against the service limit and calcu -
late piston-la-cylinder clearance.
Refer to page 7-2 for measuring the cylinder.
Measure the piston pin hole 1.0.
SERVICE LIMIT: 15.04
mm
{0 .592 inl
Measure the 0.0. of the piston pin .
SERVICE LIMIT: 14.96
mm
(0 .589
in)
Calculate the piston-la-piston pin clearance .
SERVICE LIMIT : 0.02
mm
(0.00 1 InJ
Measure the connecting rod small end 1.0.
SERVICE LIMIT : 15.06
mm
(0.593
in)
Measure the connecting rod-la-piston pin clearance.
SERVICE LIMIT: 0 .05
mm
(0.002 inl
7-4