Changing Language ..............9 Index TV System Settings ..............9 Index ....................2 Local Time Setting ...............9 Introduction ..................3 Timer Setting ................10 Front panel..................3 Parental Lock ................10 Rear view ..................3 On-Screen Display Settings ...........10 Remote control ................4 Favorite Channel Group ............11 Hardware confi guration ............5 Tools Menu ..................11 Connecting tuner to a TV ............5 Receiver information ..............11...
Hardware confi guration The MT4158 tuner can work with several devices. Most common confi gurations are shown below. Connecting tuner to a TV Connect tuner to your TV with SCART cable or composite cable as shown below. Connecting with Hi-Fi audio system...
Automatic Channel Scanning (Auto Scan) Software Confi guration 1. Select „Auto Scan” option and press OK. Startup Menu 2. Using navigation keys choose “FTA Only – Yes or No” If you fi rst time turn on tuner there will be shown “Wel- option.
Choose „Scan Band”, primary channel number „Ch 3. Choose channel from channel list on the menu. No. ” and confi rm „Search” option by pressing “OK”. Using Electronic Programme Guide (EPG) Aerial Adjustment 1. Press EPG button on remote. 2. Use directional keys to explore list of available channels 1.
TV Channel list Radio Channel List 1. Choose „Edit Channel” menu and select „TV Channel 1. Choose „Radio Channel List” in „Edit Channel” menu List” option by pressing OK. and press OK. 2. Use UP/DOWN keys to select proper channel and 2.
Local Time Setting „Region”: choose your country where you are receiv- Changing Language ing DVB-T TV signal This option allows to change the language of menu, „GMT Usage”: „ON”/„OFF” automatic time correction audio track, subtitles and teletext. „GMT Off set”: available only if “GMT Usage” is turned on.
Favorite Channel Group 3. To select option use UP/DOWN keys and OK button. 4. To leave menu press EXIT. In this menu you can rename your favorite channel group. 1. In the „Channel menu” select „Favorite” option and press OK. 2.
1. In the „Tools” menu select „Load Factory Default” op- Removing USB Device tion and press OK. In the „Tools” menu select „Remove USB device safely” 2. To confi rm this operation select “YES”. option and press OK. Wait for confi rmation and safely 3.
3. Choose game ( Tetris / Othello / Sudoku ) and press 3. To leave menu press EXIT. OK to play. 4. To leave the game press EXIT. Recording and external Media Devices 1. Press MENU button on remote to enter main menu. 2.
2. Select the fi le you want to play and press OK to pre- USB HDD Formatting view. 1. Select „HDD Format” in the „REC & Media” menu and 3. To leave menu press EXIT. pres OK. USB Storage Device Information 2.
„TS” – recording with subtitles, teletext and EPG (vid- During watching TV press PAUSE button on remote. eo format supported only by MT4158 device). The buff ering of video will be started. „PS” – recording in MPEG video format (format sup- Use LEFT/RIGHT keys to watch video at the desired ported by MT4158 and PC computer).
Troubleshooting Technical Specifi cation Trouble Cause Solution Tuner RF Input (IEC-TYPE, IEC 169-2, female) RF Output RF (IEC-TYPE, IEC 169-2, male) STANDBY indicator did Power cord is not plugged in Check the power cord Frequency range: not light Burnout fuse Contact with service 174~230MHz (VHF) Out of signal...
Need help?
Do you have a question about the MT4158 and is the answer not in the manual?
Questions and answers