Download Print this page
Insignia NS-NAV02R GPS Quick Setup Manual
Insignia NS-NAV02R GPS Quick Setup Manual

Insignia NS-NAV02R GPS Quick Setup Manual

Konica minolta gps receiver user manual
Hide thumbs Also See for NS-NAV02R GPS:

Advertisement

Quick Links

Congratulations on your purchase of a high-quality
Insignia product. Your GPS is designed for reliable and
trouble-free performance. Use this guide for initial setup.
See your User Guide for more information.
Package contents
• 4.3" GPS
• DC power adapter
• Mounting bracket
• Mounting cradle
• SD memory card (pre-installed)
• User Guide
• Quick Setup Guide
Setting up your GPS

Charging the battery

Your portable GPS comes with a built-in rechargeable
battery. Fully charge the battery before using the GPS for the
rst time. Charging time is normally about three hours. A
fully charged battery delivers about two hours of use.
See "Connecting power and charging the battery" below.
California Vehicle Code Section 26708 prohibits suction mounts on
car windshields, side, or rear windows, as they can obstruct the
driver' s clear view.
Connecting power and charging the battery
Connecting DC power
CAUTION: Disconnect the GPS from the DC power adapter when starting the vehicle.
1 Plug the power adapter into the receiver's USB port.
2 Plug the other end of the power adapter into the vehicle's
12V power socket.
Features
Top panel
Power button
Front panel
LCD Screen
Charge Indicator
Back panel
Side panel
Micro
SD Card
Slot
(cover removed)
USB
Mounting your GPS in a car
port
WARNING: The assembly must not be mounted so that it impairs the driver's view of the
road. Make sure that your car's airbags are not obstructed by the GPS.
Use the supplied mounting bracket and cradle to mount your GPS in a vehicle.
1 Slide the mount cradle onto the end of the mounting bracket to attach it.
Reset
2 Set the bottom edge of your GPS onto the mount cradle, then push the GPS
hole
into the tab (1) at the top of the mount cradle.
To remove the GPS, lift the tab (1) at the top of the mount cradle and pull
the GPS forward.
3 Lift the suction cup lever (3) and then press the suction cup to the
windshield.
4 Press the suction cup lever toward the windshield to attach the bracket to
the windshield.
Speaker
5 Rotate the knob to adjust the assembly to the proper position.
USB Port
Quick Setup Guide
NS-NAV02R GPS
Actual product may vary from image shown.
Bracket Adjuster
Locking level
3
Cigarette lighter
socket
Car Adaptor

Advertisement

loading

Summary of Contents for Insignia NS-NAV02R GPS

  • Page 1: Charging The Battery

    4 Press the suction cup lever toward the windshield to attach the bracket to the windshield. 5 Rotate the knob to adjust the assembly to the proper position. USB Port Car Adaptor NS-NAV02R GPS Actual product may vary from image shown. Bracket Adjuster Locking level Cigarette lighter...
  • Page 2: Getting Started

    Getting started Using your GPS 1 Turn on your GPS. When you turn it on for the rst time, the Language screen opens. 2 Touch the language you want. You can select English or Español.The Voice screen opens. 3 Touch the voice your want to use for the speech feature.