Attaching The Adapter To A Vesa Mount; Using The Shelf - NewerTech NUMOUNT VESA ADAPTER FOR IMAC Assembly Manual

2.2 ATTACHING THE ADAPTER TO A VESA MOUNT

The NuMount VESA adapter is compatible with VESA mounts complying with VESA
Mounting Interface Standard (MIS) part D with a 100 mm x 100 mm mounting hole pattern.
Four Phillips screws are supplied for attaching a compatible VESA mount to the NuMount
VESA adapter (Phillips screwdriver not included).
Use the included Phillips screws to attach the VESA mount to the NuMount VESA adapter.
The outer set of screw holes in a MIS-D VESA mount will line up with the screw holes in the
NuMount VESA adapter. In the following picture the NuMount VESA adapter is attached to
the NewerTech NuMount Pivot.

2.3 USING THE SHELF

The NuMount VESA adapter for iMac includes a shelf that can be used to hold a variety
of items behind your iMac. The shelf is especially useful for external hard drives or other
peripheral devices that need to be connected to your computer. The shelf is 4.5 in. x 5.75 in.,
and an optional rubber mat is included if you wish to add it to the shelf. Simply remove the
adhesive backing from the mat and apply the mat to the shelf.
4
NUMOUNT VESA ADAPTER FOR IMAC ASSEMBLY & SETUP