Canon DC301 Instruction Manual page 51

T
O RUN THROUGH THE STILL IMAGES
Push the joystick (
pressed down to run quickly through
the still images.
T 10
O SKIP OR
1 If the joystick guide does not
appear on screen, press
display it.
2 Push the joystick (
3 Select (
or [ JUMP 100 IMAGES].
4 Jump (
selected and press
You can press
joystick guide.
IMPORTANT
• Observe the following precautions while
the card access display (
on screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot
cover and do not remove the memory
card.
Downloaded From VideoCamera-Manual.com Manuals
) and hold it
100
STILL IMAGES
) toward
) [ JUMP 10 IMAGES]
) the number of images
.
again to hide the
) appears
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
/
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on a computer.
- Images whose file names have been
changed.
Slideshow
FUNC.
( 19)
FUNC.
[
• Images are played back one after
another.
• Press
to
Index Screen
.
1
Move the zoom lever toward W.
The still images index screen
appears.
2
Select (
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the
zoom lever toward W to extend the
green selection frame to the whole
page, and move (
index pages. Move the zoom lever
toward T to return to moving
between single images.
3
Press
The index screen closes and the
selected image is displayed.
switch or the operating mode.
SLIDESHOW] [START]
FUNC. to stop the slideshow.
, ) an image.
) between
.
• 51
Photos