Table of Contents
Advertisement
2.
Adjust the VOLUME CONTROL to an ap-
proximate mid-range position.
3.
Select the desired system and group using
the STEP button and CONTROL KNOB.
See the SYSTEM/GROUP/CHANNEL SE-
LECTION operating procedures for details.
The display indicates the selected group.
4.
The radio is now ready to receive messages.
5.
GROUP CALL - When a group call is re-
ceived, the radio unsquelches on the as-
signed channel and the "BSY" status flag
turns on. The group name or the originator's
ID (depending on programming) is dis-
played. Adjust the volume as necessary.
INDIVIDUAL CALL - If an individual call (a
call directed to only one radio) is received,
the radio will unsquelch on the assigned
channel and the "BSY" status flag will turn
on. "*INDV*", originators ID, or the caller's
name (if programmed) is displayed and the
"MSG" status flag flashes. Adjust the vol-
ume as necessary.
18
Responding to an individual call prior to the
programmed call-back time-out will automat-
ically direct the transmission to the originat-
ing unit.
The "MSG" status flag will remain flashing
even after the individual call time-out period
expires. Press the SPC button (SPecial Call)
to call the originating unit back. The origina-
tor's ID or name will be displayed. Follow the
procedures for sending a special call.
ENCRYPTED MESSAGE - If the transmis-
sion being received is an encrypted trans-
mission and the selected group is
programmed for private operation and the
correct cryptographic key is loaded into the
radio, then the receiver will unsquelch, the
"PVT" status flag will flash and the private
message will be heard in the speaker. The
radio automatically switches between clear
or private operation when it is receiving on a
group or channel programmed for private
operation.
Advertisement
Table of Contents
